Installation of steam to the specific requirements of the solenoid valve

Installation steam to the specific requirements of the solenoid valve time solenoid valve installed before the big requirements, installation steam solenoid valve, the pipeline must be clean. The installation of the filter in front of the valve is recommended, steam pipe installation steam trap. , when installation steam solenoid coil up, and keep the vertical position, the arrow or mark in the solenoid valve should be consistent with the pipe flow, shall not be installed in places with splashing water or water leakage. The working medium of electromagnetic valve, steam should be clean and no impurity particles, electromagnetic trims on the surface of the dirt and filters, need to clean on a regular basis. , in the pipeline system, installed on the branch of the electromagnetic valve size should be less than the main valve. , the electromagnetic valve failure occurs, in order to timely isolation solenoid valve, and ensure the normal operation of the system, the best install bypass device. , solenoid valve can not be installed in the pipeline dips, lest because of steam condensation water, impurities precipitation within the valve and prevent action. And cannot be used in explosion hazard. , under the condition of insufficient rigidity pipeline, recommend to use before the valve pipe bracket, so as to avoid electromagnetic valve caused by vibration while working. , in front of the solenoid valve installation, attention should be paid to see the product sign, read the instruction for use, to determine whether a product conforms to the conditions of use. , electromagnetic valve should be installed on the pipeline before and after the pressure gauge, in order to observe the pipe pressure.