Goyen Type Pilot valve RCA3D2 1/8 Inch Priority valve Solenoid valve

       

Construction

◈ Body: Aluminium

◈ Locknut: Mild steel zinc passivated

◈ Ferrule: 304 SS

◈ Clip: Mild steel (plated)

◈ Screws: 302 SS

◈ Armature: 430FR SS

                           

part.1

Suitable for: All Goyen dust collector diaphragm valves.

                           

part.2

Spare Parts
K0380 Replacement seal, armature, spring & ferrule kit.
K0384 As above in viton.

• C-Tick
• EMC (89/336/CE)

◈Packaging Details: Standard Carton box,and other special packing according to customer's requirement.

◈Port: Ningbo/Shanghai

◈Delivery time: 1-3 work days

◈Spring damage. The springs on the pilot head of the pulse valve are easily damaged, which results in the long-term bleeding of the pulse valve to the nozzle.
   Solution: Replace the spring.

◈Damage of rubber pad. After using for a long time, the rubber pad on the pilot head of the pulse valve is easily damaged, resulting in the long-term bleeding of the pulse valve to the nozzle.
   Solution: Replace the rubber pad

◈Pilot dirt. Because the air intake is not clean, the fouling of the pilot is accumulated, resulting in the long-term intake of the nozzle or the pulse valve doesn't work after electrification.
   Solution: Clean the pilot.

◈Damage of diaphragm. After long-term operation, the diaphragm is easy to oxidize, resulting in leakage of the pressure relief port, and the pulse valve doesn't work.
   Solution: Change diaphragm.

◈ Port size: 1/8"

◈ Color: Slivery

Prepare pilot mounting hole in panel to Ø19.3/19.4 (Ø0.760"). Panel thickness must exceed 1.5mm (0.062"). Ensure o-ring is in place before tightening locknut. Preferably, install pilot valves with solenoid on top. For reliable operation, ensure supply voltage is within -10% and +15% of rated solenoid voltage. Replace components within 1 million cycles (refer to Spare Parts)

We can provide a series of after-sale service, such as product introduction, mounting, debugging, technical support and so on.