Electromagnetic valve recommendation: check valve, safety valve, direction control valves, speed regulator

Recommended one-way valve, safety valve, direction control valves, solenoid speed regulator hc360 summer not ruin time solenoid valve with electromagnetic control of industrial equipment, in the industrial control system, is used to adjust the direction of the medium, flow, speed and other parameters. We use electromagnetic effect to control electromagnetic valve, the main control mode is controlled by relay. In this way, the electromagnetic valve can cooperate with different circuit to achieve the desired control, control precision and flexibility to be able to guarantee. Solenoid valve, electromagnetic valve, there are many kinds of different work in different position of the control system, the most commonly used is a one-way valve, safety valve, direction control valves, speed regulator, etc. Solenoid valve has closed cavity, open a hole in different position, every hole leads to different tubing, cavity valve is among, both sides are two electromagnets, which face the magnet coil electricity valve will be attracted to which side, by controlling the movement of the valve body or blocking leakage of different discharge of oil hole, and the oil hole is always open, hydraulic fluid will enter the different oil drain, and then through the oil pressure to push the cylinder piston, piston drives the piston rod, piston rod drive mechanism. This flow of electricity by controlling the electromagnet fault controls the mechanical movement. Below small make up recommend will give you some electromagnetic valve.