Electric pneumatic - valve factory product is how to carry out the selection?

Electric pneumatic - valve factory product is how to carry out the selection? Electric pneumatic control valve feedback: the motor running, through the gear run, valve positioning signal output by SanJieTou slide rheostat, in addition to the three thread limit signals. There were many product model, and each is widely used by many industry. Nowadays, with the constant innovation of science and technology, upgrading products meet people's needs, especially the company's products, performance is also constantly improved. Below is an introduction to the related knowledge of products. Electric pneumatic control valve should be how to install? Electric pneumatic control valve is suitable for the installation work piston top at the bottom of the horizontal line. Temperature sensor can be installed in any position, the length must be immersed into the accused of medium. Electric pneumatic control valve generally includes drive, receive the drive signal ( 0 - 10 v or 4 - 20MA） Adjusted to control the valve, can also according to the need of control, intelligent network control system, optimization control to realize remote monitoring.