Electric pneumatic control valve should be how to install?

Electric pneumatic control valve is one of the pneumatic control valve, but there is a difference between and the working principle of pneumatic control valve, as follows: electric pneumatic control valve movement theory, motor power 220 vac or 380 vac, control signal 4 ~ 20 ma, valve controller, the controller convert current signal to the Angle of the stepper motor trip signal, motor rotation, by gears, levers, or gear lever, drive the stem, straight stroke or Angle of stroke. Electric pneumatic control valve feedback: the motor running, through the gear run, valve positioning signal output by SanJieTou slide rheostat, in addition to the three thread limit signals. Electric pneumatic control valve should be how to install? Electric pneumatic regulator is the most suitable work for the installation of piston top at the bottom of the horizontal. Temperature sensor can be installed in any position, the length must be immersed into the accused of medium. Electric pneumatic control valve generally includes drive, receive the drive signal ( 0 - 10 v or 4 - 20MA） Adjusted to control the valve, can also according to the need of control, intelligent network control system, optimization control to realize remote monitoring.