Electric pneumatic control valve production process of product introduction?

Electric pneumatic control valve production process of product introduction? Electric pneumatic control valve is suitable for the installation work piston top at the bottom of the horizontal line. Temperature sensor can be installed in any position, the length must be immersed into the accused of medium. Product development trend is unstoppable, and it applies not only to an industry, but now more and more industry will be the product. And now in the science and technology, products with each passing day, to their advantage to get incisively and vividly. But in order to use more security and trust, must need to read the instructions before use. Electric pneumatic control valve is one of the pneumatic control valve, but there is a difference between and the working principle of pneumatic control valve, as follows: electric pneumatic control valve movement theory, motor power 220 vac or 380 vac, control signal 4 ~ 20 ma, valve controller, the controller convert current signal to the Angle of the stepper motor trip signal, motor rotation, by gears, levers, or gear lever, drive the stem, straight stroke or Angle of stroke. Electric pneumatic control valve feedback: the motor running, through the gear run, valve positioning signal output by SanJieTou slide rheostat, in addition to the three thread limit signals. Electric pneumatic control valve should be how to install? Electric pneumatic control valve generally includes drive, receive the drive signal ( 0 - 10 v or 4 - 20MA） Adjusted to control the valve, can also according to the need of control, intelligent network control system, optimization control to realize remote monitoring. Warm prompt: electric pneumatic control valve product has many advantages, its performance in the development of science and technology driven, therefore, is to use frequency is high. But in order to make the product update to use security and trust, not only need to select the regular manufacturers when buy, but also at the time of operation must be carried out in accordance with the instruction guidance!