Electric pneumatic control valve manufacturer for the product installation steps

Electropneumatic valve manufacturer for the product installation steps explained: electric pneumatic regulator feedback: the motor running, through the gear run, valve position signal output by SanJieTou slide rheostat, there are also three lines to the limit of signal. Products are manufactured by many manufacturers and the development of science and technology leading product performance improvement, but in order to use more security and trust, must need to read the instructions before use. Electric pneumatic control valve movement theory, motor power 220 vac or 380 vac, control signal 4 ~ 20 ma, valve controller, the controller convert current signal to the Angle of the stepper motor trip signal, motor rotation, by gears, levers, or gear lever, drive the stem, straight stroke or Angle of stroke. Electric pneumatic control valve should be how to install? Temperature sensor can be installed in any position, the length must be immersed into the accused of medium. Electric pneumatic control valve generally includes drive, receive the drive signal ( 0 - 10 v or 4 - 20MA） Adjusted to control the valve, can also according to the need of control, intelligent network control system, optimization control to realize remote monitoring. Warm prompt: the development of electric pneumatic - valve product depends on the progress of science and technology, today's products, it has been used in many industries. But I don't mean it at the time of installation and use can be simple operation, but should also be carried out in accordance with the formal instruction on!