Electric pneumatic control valve installation instructions?

Electric pneumatic control valve installation instructions? Electric pneumatic control valve feedback: the motor running, through the gear run, valve positioning signal output by SanJieTou slide rheostat, in addition to the three thread limit signals. The installation of the product need according to the instruction manual for installation, so as to ensure the normal operation of the product in the future. There were many now product model, and with the constant innovation of science and technology, upgrading products meet people's needs, especially the company's products, performance is also constantly improved. Electric pneumatic control valve movement theory, motor power 220 vac or 380 vac, control signal 4 ~ 20 ma, valve controller, the controller convert current signal to the Angle of the stepper motor trip signal, motor rotation, by gears, levers, or gear lever, drive the stem, straight stroke or Angle of stroke. Electric pneumatic control valve should be how to install? Temperature sensor can be installed in any position, the length must be immersed into the accused of medium. Electric pneumatic control valve generally includes drive, receive the drive signal ( 0 - 10 v or 4 - 20MA） Adjusted to control the valve, can also according to the need of control, intelligent network control system, optimization control to realize remote monitoring. Warm prompt: today's electric pneumatic - valve products manufacturers a dime a dozen, choose a suitable own manufacturer is home need more investigation. The birth of products brought a lot of convenience to human life, and the product is not static, but with the development of science and technology innovation constantly, so in order to their own interests, it is important to choose suitable for their products.