lv-pneumatic
Pneumatic industry,Diaphragm Valves of Bag House Filter, Personalized Customization
Latest products
Electric hard seal pneumatic valve installation steps
by：AIRWOLF
2020-10-15
Electric hard seal pneumatic valve USES a three-dimensional eccentric principle design, make the space of the sealing surface movement to achieve ideal, no friction, no interference with each other, together with sealing material is properly selected, so that the pneumatic valve sealing, corrosion resistance, high temperature resistance and abrasive resistance and so on to get a reliable guarantee, which has been widely used.
Below is the electric hard seal pneumatic valve installation steps.
in the first place, the installer in the installation of electric pneumatic valve, hard seal need to check parts according to the requirements of reserve, is and the specifications of the products is the same. Then you need to take the pneumatic valve carefully out from the packing.
second, then require the installer to shut down or operators need to install this instrument parts, machine or equipment of the power, you should know, no matter what kind of things you install or component part (s), before installation, must turn off the power supply, if you can, you can also always power off, after turn off the power, the need for stress relief. In order to safeguard equipment shut down decompression, prevent any unexpected disturbance.
in the end, when you use or installation, is not freely to change electric hard seal pneumatic valve components. Of course some processing plant in the use of the pneumatic valve, in order to ensure the liquid medium can be applied to the contact material, generally the use of air, water or oil. Of course were used as liquid such as oil, security in parts working temperature range, is not any change. This is believed to. During the installation process, of course, this also is very necessary to pay attention to, the selected liquid medium, must be careful to select, in order to avoid the chosen medium liquid, not suitable for contact with the material.
in the first place, the installer in the installation of electric pneumatic valve, hard seal need to check parts according to the requirements of reserve, is and the specifications of the products is the same. Then you need to take the pneumatic valve carefully out from the packing.
second, then require the installer to shut down or operators need to install this instrument parts, machine or equipment of the power, you should know, no matter what kind of things you install or component part (s), before installation, must turn off the power supply, if you can, you can also always power off, after turn off the power, the need for stress relief. In order to safeguard equipment shut down decompression, prevent any unexpected disturbance.
in the end, when you use or installation, is not freely to change electric hard seal pneumatic valve components. Of course some processing plant in the use of the pneumatic valve, in order to ensure the liquid medium can be applied to the contact material, generally the use of air, water or oil. Of course were used as liquid such as oil, security in parts working temperature range, is not any change. This is believed to. During the installation process, of course, this also is very necessary to pay attention to, the selected liquid medium, must be careful to select, in order to avoid the chosen medium liquid, not suitable for contact with the material.
Custom message
