Cylinder what brand is good?

Cylinder is a component of the play an important role, so we must choose according to brand, when choice must meet the requirements of the quality, so using it would trust, but small make up to notice a lot of people don't care about these, just cheap, this is wrong, this is different from other things, is not cheap, below small make up for what brand is good and what is the structure of the cylinder cylinder answer one by one to you: cylinder what brand is good? 。 Single-acting cylinder: only one end of the piston rod, pushes the piston will generate thrust, by spring or self-respect to return. 。 Double-acting cylinder: is from piston were alternately on both sides of the gas supply, in one direction or the two directions of output force. 。 Diaphragm cylinder: replace with diaphragm piston, then output force in one direction, with a spring return. It sealed performance is good, but short. 。 Impact of cylinder: this is a relatively new components. Can put the compressed gas pressure can be converted to the piston velocity ( ~ m/s) The movement of the kinetic energy to work. Increases the impact cylinder cover with nozzle and discharge port. The cover and the cylinder piston into gas storage chamber, tail and head cavity 3 rooms. It is widely used for blanking, punching, crushing and shaping and other assignments. Reciprocating swing oscillating cylinder cylinder said, by the blade will be divided into two, its inner cavity to two cavity alternating gas supply, output shaft swing motion, oscillating Angle is less than °. In addition, there is the rotary cylinder, gas-liquid damping cylinder, and the step cylinder, etc.