Cylinder disassembling inspection

Cylinder disassembling inspection cylinder during dismantling, there is a check item, the inspection items are very important. First said cylinder considerations: the first is to check whether containing condensate in the exhaust. If a condensed water discharge, the location of the filter should be considered whether appropriate, all kinds of use in addition to the water element is reasonable, condensed water management is in line with the requirements. Second to know if there is a leak shouldn't exhaust vent. A small amount of leakage signal rod cylinder early damage. The main reason for the leak is sealed, air pressure caused by inadequate. Finally, need to check whether the oil content in the exhaust is moderate, method is to put white paper in vent near, in work after period of time, if only lighter spots appear, good lubrication performance of the equipment. If the poor lubrication, oil mist device should be considered whether the installation position of appropriate, selected proper specifications, drop fuel control is reasonable and management method is in accordance with the requirements. Besides the mounting points: be very careful, cautious, to avoid damage to tools or parts. And be careful not to hurt more than need to repair or replacement of parts. , removing work, to avoid the whole system running, pay attention to not make the impurities into the components inside. These are all need to be aware of when disassembling point, is also to be very careful when checking, don't ignore the important points.