lv-pneumatic
Pneumatic industry,Diaphragm Valves of Bag House Filter, Personalized Customization
Latest products
Cleaning and lubrication of the pneumatic valve
by：AIRWOLF
2020-10-20
The purpose of the pneumatic valve maintenance work, is to ensure the neatness of pneumatic valves in all the year round, good lubrication, pneumatic valve parts is complete, the state of normal operation.
( A) Pneumatic valve cleaning
the surface of the pneumatic valve, pneumatic valve rod, and pneumatic stem nut of the trapezoidal thread, pneumatic stem nut and sliding parts and components such as gear, worm gear, worm can product many dust, grease and dirt such as medium infectant to wear and corrosion in pneumatic valves. So often maintain the cleanness of and activities outside pneumatic valve parts, pneumatic valve to protect the paint a complete, is obviously very important.
（ 2) Pneumatic valve lubrication
trapezoidal thread pneumatic valve, pneumatic valve stem nut and stent sliding parts, bearing parts, gears and worm gear and worm gearing parts and other activities, all need good lubrication condition, reduce the friction between each other, each other to avoid wear and tear. If some parts there are oil cup or nozzle, damage or loss in the operation, should repair equipment, oil to dredge. Lubrication parts should be lubricated periodically according to the specific situation. Often open, pneumatic valve is suitable for high temperature interval of a week to go once a month.
2 don't often open, the temperature is not high pneumatic valve refueling cycle can be longer. Lubricants such as oil, butter, mos2 and graphite.
3. Pneumatic valve is not suitable for high temperature with oil, butter, they will loss due to high temperature melting, and is suitable for injection of molybdenum disulfide and wipe clean graphite powder.
4. The parts of the need for bare lubrication, such as the trapezoidal thread, gear and other parts, if use the oils and fats such as butter, infected with dirt easily, and lubrication mos2 and graphite powder, is infected with dirt is not easy, the lubrication effect is better than butter.
5. Graphite powder is not easy to apply directly, can use a few used synthetic oil or water cream shape.
6. Oil seal cock pneumatic valve oil should be in accordance with the stipulated time, otherwise easy to wear and leakage.
( A) Pneumatic valve cleaning
the surface of the pneumatic valve, pneumatic valve rod, and pneumatic stem nut of the trapezoidal thread, pneumatic stem nut and sliding parts and components such as gear, worm gear, worm can product many dust, grease and dirt such as medium infectant to wear and corrosion in pneumatic valves. So often maintain the cleanness of and activities outside pneumatic valve parts, pneumatic valve to protect the paint a complete, is obviously very important.
（ 2) Pneumatic valve lubrication
trapezoidal thread pneumatic valve, pneumatic valve stem nut and stent sliding parts, bearing parts, gears and worm gear and worm gearing parts and other activities, all need good lubrication condition, reduce the friction between each other, each other to avoid wear and tear. If some parts there are oil cup or nozzle, damage or loss in the operation, should repair equipment, oil to dredge. Lubrication parts should be lubricated periodically according to the specific situation. Often open, pneumatic valve is suitable for high temperature interval of a week to go once a month.
2 don't often open, the temperature is not high pneumatic valve refueling cycle can be longer. Lubricants such as oil, butter, mos2 and graphite.
3. Pneumatic valve is not suitable for high temperature with oil, butter, they will loss due to high temperature melting, and is suitable for injection of molybdenum disulfide and wipe clean graphite powder.
4. The parts of the need for bare lubrication, such as the trapezoidal thread, gear and other parts, if use the oils and fats such as butter, infected with dirt easily, and lubrication mos2 and graphite powder, is infected with dirt is not easy, the lubrication effect is better than butter.
5. Graphite powder is not easy to apply directly, can use a few used synthetic oil or water cream shape.
6. Oil seal cock pneumatic valve oil should be in accordance with the stipulated time, otherwise easy to wear and leakage.
Custom message
