brass water solenoid valves ODM auto watering

Company Advantages
1. AIRWOLF CO, LTD has gained praises from home and abroad for its stainless steel solenoid valves for water that fully shows in water solenoid valves .
2. The product has many competitive advantages and is widely used in the field. Airwolf Automation has nearly 15 years of experience in manufacturing pneumatic components
3. This product has strong electromagnetic compatibility. It is not likely to be affected by external devices or cause intolerable electromagnetic interference to its surroundings. Established in 2006, Airwolf Automation continues its commitment to offering excellent quality

Detailed Description

It is a 1" Normal Close Water solenoid valve.Water solenoid valve has closed cavity, in a different location to open a hole, each hole leads to different tubing, cavity valve is among, both sides are two electromagnets, which face the magnet coil electricity body will be attracted to which side, by controlling the movement of the valve body blocked or leakage of different discharge of oil hole, and the oil hole is always open, hydraulic fluid will enter the different oil drain, and then through the oil pressure to push the cylinder piston, piston drives the piston rod, piston rod drive mechanism.Thus the mechanical motion is controlled by controlling the current of the electromagnet.

brass water solenoid valves ODM auto watering-1

Features & Benefits

◈Model: 2W160-10 2W160-15 2W200-20 2W250-25 2W350-35 2W400-40 2W500-50 Joint Pipe Bore:G1/8;G1/4;G3/8;G1/2;G1;G2.

◈Operation Fluid Viscosity:20 CST (Below)

◈Working-pressure:0~2.0MPa

◈Max. Pressure Resistance:3.5MPa

◈Operating Temperature Range:-5~+80℃

◈Standard voltage:AC220,AC110V,AC24V,DC24V,DC12V.

◈Voltage Range:±10%

◈Material of Body:2W: Brass ; 2S: Stainless Steel

◈Material of Oil Seal:NBR, EPDMVITON / NBR, EPDM or VITON

◈Type:Normal Close Type ; Normal Open Type

◈Motion Pattern:Direct Drive Type

◈Working Medium: Air, Water, Oil, Gas,Fuel

Advantages

brass water solenoid valves ODM auto watering-2

part.1

Direct-acting normally closed two solenoid valve, commutation quickly and sensitively

brass water solenoid valves ODM auto watering-3

part.2

The structure is light and compact

brass water solenoid valves ODM auto watering-4

part.3

Body material is stainless Steel

brass water solenoid valves ODM auto watering-5

part.4

Suitable for a variety of working medium.

Application

◈ Water solenoid valve is suitable for water or liquid as the working medium, can automatically control or remote control of water, oil, liquid and other working medium pipeline on and off.Because this valve USES the rubber seal, therefore to the working medium cleanliness greatly reduces, has opens and closes quickly, the reliability high characteristic.

brass water solenoid valves ODM auto watering-6

Characteristics

◈The diaphragm structure with direct motion is adopted to start without pressure, which expands its application field

◈The use of flat diaphragm structure opening and closing reliable, and enhance the service life of the product.

◈The use of laminated coils improves the safety of the product in a wide variety of environments.

Installation

◈Solenoid valve is generally directional, can not be installed in reverse, usually on the valve body with "→" to indicate the direction of medium flow, installation should be in accordance with the direction of"→ "instructions

◈Manual shut-off valve should be added before and after the solenoid valve, and a bypass should be set to facilitate the maintenance of solenoid valve in case of failure.

◈Take care not to use too much sealing material when taking over.

◈Try not to let the solenoid valve in the power state for a long time, It will reduce the coil life or even burn out the coil, that is to say, often open, often closed solenoid valve can not be used interchangeably.

Company Features
1. If ignoring the importance of technology optimization, water solenoid valves could not have been so popular in the market.
2. The corporate culture of AIRWOLF CO, LTD includes stainless steel solenoid valves for water . Please contact.

c******n

stainless steel solenoid valves for water from YW DKE TRADING COMPANY mainly uses high-end water solenoid valves materials.

v******p

The main materials of this type of stainless steel solenoid valves for water products are stainless steel solenoid valves for water.

s******d

Our water solenoid valves has its own style than other products thanks to the support of our excellent staff.

j******h

From material selecting to material processing, YW DKE TRADING COMPANY finish independently.

i******c

Following the stainless steel solenoid valves for water design, water solenoid valves will appear more prominent in appearance.

q******n

stainless steel solenoid valves for water Manufactured by advanced manufacturing technology and craftsmanship, with fast response, stable information transmission and strong recognition ability, it is a functional and practical scanner product.

Product Message

*Name

Phone

*E-mail

*Content