Company Advantages
1. AIRWOLF pneumatic vibration equipment has been manufactured in strict accordance with the requirements of international quality standards for gifts and crafts, and its quality can be guaranteed because it has passed through many quality certifications. Airwolf Automation keeps expanding product range through product and technology innovation
2. The product is able to help business owners save time, eliminate data duplication, and thus increases the efficiency of the operation. Airwolf Automation offers OEM/customization service to meet customers' specific requirements
3. Since our professional quality control personnel track the quality throughout the production process, the product is guaranteed to have zero defects. Airwolf Automation has no special requirement for MOQ
4. Reliable certification: the product has been submitted for certification. To date, several certificates have been obtained, which could be could be evidence for its excellent performance in the field. Airwolf Automation has nearly 15 years of experience in manufacturing pneumatic components
5. The highest possible quality and consistency of this product are guaranteed through the continuous monitoring of all processes, the strict quality management system, a final quality check, etc. Airwolf Automation has developed a wide distribution network in over 13 countries

◈ BVP series: Air cushioned type, low noise character. It is suitable for quiet area application; a good solution to clog stick onto tank wall and material delivery problem. Also, it can be designed to apply on vibrating separator, conveyer.

◈ BVP series: Piston impact types can get rid of rust, material accumulated inside pipe. And the direct impact on tank with low S.G. with high moisture material inside, material build-up, pipe clog or rust.

◈ To avoid tank wall amplitude caused by vibrator moves in left and right direction, U shape steel of fixer is a good choice. To avoid tank wall broken by vibrator force, stitch weld method is suggested.(10mm blank space will be required on two ends of U shape steel).The side of air exhaust should be down. The vibrator should be fixed by High Tension Screw.  

◈To fix the vibrator with Spring Washer or Locked Screw, which could avoid any screw loose during Vibrating. Also suggest using the glue to fix it. As the full utilize vibrator performance, appropriate chose for F.R.L. (Filter/Regulator/Lubricator) combination unit, Solenoid Valve, PU Tubing will be necessary.

◈ All vibrator require lubricating oil with low viscosity for "SAE 20" under operating.The lubrication oil need a drop in every 3 minutes (Which lubrication oil could be adjustable by different operation condition).

◈ Please check the Vibrator's Bottom Seal Cover and fixing situation before Starting, which avoid any danger while start Vibrator

◈Maximum Air Pressure: 6 Bar (87PSI) / Maximum Temperature: 100 C (220 F)

◈If other instruments are closing the Vibrator, please shut down the Air Pressure Source before installation or maintain the instruments.4.Cause of the fix screw losing on Vibrator, the Vibrator would be making danger to worker.

◈ Please check the lubrication very often. (If lubrication capacity is less than 35%,Please refill it.)

◈ Please use the Type Sealer onto Quick Joint for 2~3 turns, but please leave 2mm in front of screw without the Type Sealer which is avoid any piece of Type Sealer into Vibrator.

◈To connect with Security Cable if vibrator is installed onto hopper.

Company Features
1. AIRWOLF CO, LTD boasts its strong R&D capability and has gained many patents for pneumatic vibration equipment .
2. We are not the only one company to produce pneumatic vibrator , but we are the best one in term of quality.
3. Looking ahead, AIRWOLF will continue to make every effort for the prosperity of pneumatic vibration industry. Call now!