A simple introduction explosion-proof solenoid 10 installation steps

A simple introduction of explosion-proof solenoid valve to industrial electrical installation steps China net a fortune, explosion-proof solenoid coil up when installation, and keep the vertical position, or arrow mark in the explosion-proof solenoid valve should be consistent with the piping to, shall not be installed in places with splashing water or water leakage. , the working medium of explosion-proof solenoid valve should be clean and no impurity particles, explosion-proof solenoid valve internal parts on the surface of the dirt and filters, need to clean on a regular basis. , explosion-proof solenoid valve failure occurs, in order to timely isolation explosion-proof solenoid valve, and ensure the normal operation of the system, the best install bypass device, in the pipeline system, installed on the branch of explosion-proof solenoid valve size should be less than the main valve. Before, installation, explosion-proof solenoid valve, pipe must be clean. The installation of the filter in front of the valve is recommended, steam pipe installation steam trap. , can't install the valve in the pipeline dips, lest because of steam condensation water, such as precipitation of impurities in the valve and prevent action. And cannot be used in explosion hazard. , under the condition of insufficient rigidity pipeline, recommend to use before the valve pipe bracket, so as not to cause vibration explosion-proof solenoid valve work. , before the installation, pay attention to see the product sign, read the instruction for use, to determine whether a product conforms to the conditions of use. , explosion-proof solenoid valve should be installed on the pipeline before and after the pressure gauge, in order to observe the pipe pressure.